Condensation-Type Drying Cabinet for 4 Complete Sets of Workwear

The condensation-type drying cabinet for 4 full sets of workwear is the ideal solution for businesses and organizations with regular drying needs, such as fire departments, police departments, the construction and forestry sectors, as well as hotels, chalets, and sports facilities. Thanks to condensation drying , workwear and equipment are dried gently , hygienically, and independently of room ventilation or heating, indoors at room temperatures as low as 7 °C.

The “Condensation Drying Cabinet for 4 Complete Sets of Workwear” stands out for the following features:

• Gentle condensation drying of workwear, shoes, and gloves
• Dries 4 jackets and pants, 4 pairs of shoes, and 4 pairs of gloves at the same time
• For unheated rooms with little ventilation, at temperatures of 7 °C or higher
• With 1 clothes rod for hanging jackets and pants
• Inflatable shoe nozzles: 2 pairs of 480 mm and 2 pairs of 350 mm
• With blow-out glove nozzles (4 pairs, 220 mm)
• With 8 glove holders on the inside of the door
• Clothes hangers are available separately as accessories below (not included)
• Separate on/off switch
• 24-hour timer and 6-hour timer—easy to operate with a rotary knob
• Quiet operation at approximately 65 dB(A)
• Secure storage using a twist latch for a padlock
• Built-in ozone lamp for odor and air neutralization
• Indoor air is relieved through the automatic drainage of condensate
• Condensation is drained using a 1/2″ hose
• Sturdy and moisture-resistant thanks to powder-coated steel
• With a 1,800 mm power cord

The interior of the cabinet can accommodate 4 complete sets of gear at the same time. Jackets and pants are hung on the clothes rail, while shoes and gloves are dried from the inside using targeted air jets. Four pairs of shoe nozzles (2x 480 mm, 2x 350 mm) and four pairs of glove nozzles (220 mm) are provided for this purpose. The cabinet is supplemented by eight holders on the inside of the door for additional items. The drying cabinet comes standard without hangers. However, matching special hangers are available separately as accessories (see below) and can be added flexibly as needed.

The drying system operates on the principle of condensation: moisture is extracted from the clothing rather than released into the room. This makes the cabinet particularly suitable for unheated or poorly ventilated rooms with temperatures of 7 °C or higher. The condensation produced during the drying process is automatically drained. The opening for the water connection is located on the right side. A 1/2″ hose is integrated into the cabinet, which can be routed outside and connected to a drain if necessary. If no direct drain is available, a standard plastic jug with a capacity of about 10–15 liters can be used; it should be easy to handle and empty (collection container not included).

The enclosure is made of powder-coated steel, and a twist-lock latch designed for a padlock reliably protects the equipment from unauthorized access. Two timers are available for daily operation: The 6-hour direct-start timer allows for spontaneous drying cycles, while the 24-hour timer handles time-controlled operation. The control system is supplemented by a separate on/off switch. During the drying process, an integrated ozone lamp helps reduce odors and germs. If you need a larger model, we recommend our “Condensation Drying Cabinet for8 Complete Sets of Workwear.”

We offer professional advice on the version, features, and placement of the drying cabinet. The drying cabinet is ready to plug in and is delivered assembled on a pallet. It is delivered by truck to the curb.