Categories
The stainless steel built-in shoe washing station was developed for fire departments, military barracks, and commercial and agricultural operations. It is designed for flush-mounted or partially recessed installation in floors and thoroughly cleans dirty work shoes and safety shoes using a sturdy sole brush with a water supply.
The stainless steel built-in shoe washing station offers the following impressive features:
- A high-quality product from BLUE LEVEL Cleaning Systems
- Made of brushed 2 mm stainless steel sheet, grade 1.4301
- For flush-mounted or partially recessed installation
- Depending on the version, with 1 or 2 cleaning stations
- Per cleaning station with a coarse sole brush
- Designed specifically for work shoes and low-cut safety shoes
- With water spray nozzles for moistening brushes and shoe soles
- With a plastic hand brush that carries water
- Stainless steel holder for a hand brush
- Convenient crossbar for resting your foot
- Handrail for a secure footing
- Removable stainless steel grate to cover the brush opening
- With 2 shut-off valves
- With 4 height-adjustable legs
- ½” water connection, drain NW 50
- Silt-collection bucket with stainless steel odor trap
- Supplied with a plastic hand brush with water supply and a stainless steel mounting bracket
- No power required
The Shoe washing station is installed flush with the floor or partially recessed into the floor and is suitable for permanent cleaning stations in professional work areas. When installed flush with the floor, the stainless steel grating covers the brush opening to ensure the surface remains safe to walk on. Dirty water is collected in the stainless steel tray and drained via a drain, a sludge collection bucket, and a trap.
Work shoes and safety shoes are cleaned using the coarse sole brush. The integrated water spray nozzles wet the brush and the sole of the shoe during the cleaning process, reliably removing dirt, soil, and residue. Since this version does not have side brushes, it is particularly suitable for lower-cut shoes.
A water-fed hand brush is included for manual follow-up cleaning. The hand support bar ensures a secure grip, while the crossbar allows you to rest your foot comfortably. The Shoe washing station is available with either 1 or 2 cleaning stations.
For an additional charge, the plastic hand-washing brush can be replaced with a high-quality stainless steel hand-washing brush featuring nylon bristles, a hand-lever quick-close valve, and a heavy-duty wire-braided hose (see Options).
The water connection must comply with the regulations of the responsible water utility. The European standard DIN EN 1717 serves as the guiding principle, supplemented by national standards. The drinking water installation must be performed exclusively by a licensed specialist contractor. When connecting to the drinking water system, a system separator or pipe separator approved by the building owner must be used (not included in the scope of delivery).
- Housing: brushed 2 mm stainless steel sheet 1.4301
- Dimensions: (version: for 1 cleaning station)
- 581 mm x 886 mm x 445 mm (width x depth x height)
- Item number:
- Dimensions: (Version: for 2 cleaning stations)
- 1162 mm x 886 mm x 445 mm (width x depth x height)
- Item number:
- Water inlet: ½"
- Water outlet: NW 50
- Power connection: not required
- Weight: 48 kg net
- Warranty: 2 years
